LED LIGHTING

Onstate Technologies Products

Onstate Product Brochure

LED Linear Lights

Flexible LED light strips: FLST SERIES SPECIFICATIONS (PDF)
Power: 12 VDC (+/- 10%), 7W/m, 14W/m.
LEDs: High-power white LEDs, SMD 5050 (3 chips/LED, Epistar), 30 LEDs/section, 0.6A/section
Dimension: 50cm section, 250cm roll / 100cm (L) section, 500cm roll
Material: Flexible- PCB, silicone tube, silicone gel cover
Wiring: 12” red/black power input. Solder end-to-end for inline connections
Mounting: Double-sided tape or clip on metal flat bar or U-channel extrusion

Linear LED light bars: LBA SERIES SPECIFICATIONS (PDF)
Power: 12 VDC VDC (+/- 10%), 7.2W Max
LEDs: 30 high-power white LEDs, SMD 5050 (3 chips/LED, Epistar)
Dimension: 51.6cm (L) x 2.0cm (W) x 1.5cm (D)
Material: Aluminum extrusion, anodized silver, 1.6mm clear acrylic cover
Wiring: 12” red/black power in w/connector, inline end-to-end connections.
Mounting: Spring steel mounting clips
Outdoor LED Lighting
LED Illuminators
Printed Circuit Boards
LLIA90 LED Array: LLIA90 PCB SPECIFICATIONS (PDF)
Material: 1/16”, FR4 glass fibre
Plating: 2 oz copper, gold flash finish, double-sided, plated holes
Dimension: 3.4” x 2.3” rectangular
Compliance: RoHS, lead-free
LED: 5mm type, 90 total. 3 banks (3s10p), built-in LED driver and photocell circuit. Adjustable current
Maximum power: 10W total
LED DIMMER
LED pcb
Video backlight modulator
DSPB10 10 LED Bargraph: DSPB10 PCB SPECIFICATIONS (PDF)
Material: 1/16”, FR4 glass fibre, double-sided, plated holes, HASL, RoHS, lead-free
Dimension: 0.36”x8.21”
LED’s: 3/5mm, SMD, 18 total, 3 sections (6 LEDs per section)
Maximum power: 2W total
Audio spectrum band display, color organ.
PEBM-4 LED Bargraph Meter: BM-4 PCB SERIES SPECIFICATIONS (PDF)
Material: 1/16”, FR4 glass fibre, double-sided, plated holes, HASL, RoHS, lead-free
Dimension: 1.18”x1.77”
LED’s: 10 LED bargraph display (LM3914/5/6), adjustable settings. Built-in op-amp circuit. Multiple applications
Maximum power: 2.5W total. LM78xx regulator optional
PEBP Battery Protector: BP PCB SPECIFICATIONS (PDF)
Material: 1/16”, FR4 glass fibre
Plating: Double-sided, plated holes, silkscreen, green soldermask both sides
Dimension: 1.71” square
Operating voltage: Up to 30V
Design: Dual op-amp auto cut-off circuit, adjusting on/off settings. N-CH MOSFET out, flashing LED display
Maximum power: 8A N-CH switch
PEPCR Linear LED Driver: PCR PCB SPECIFICATIONS (PDF)
Material: 1/16”, FR4 glass fibre
Plating: 2 oz copper, silver-plating, double-sided, plated holes.
Dimension: PCB- 3.8”x0.82”, bus bar-3.8”x0.22”
Compliance: RoHS, lead-free
Operating voltage: Up to 30V
Design: Dual op-amp linear LED driver with photocell circuit. N-CH current regulation. Adjustable settings. PWM.
Maximum power: 8A N-CH switch
MFSRC Multi-function LED Driver: MFSRC PCB SPECIFICATIONS (PDF)
Material: 1/16”, FR4 glass fibre
Plating: 2 oz copper, double-sided, plated holes, green soldermask both sides
Dimension: 2.3”x2.2”
Input: Up to 50VDC or 30VAC
Design: Supertex HV9910B/16B LED driver IC with op-amp photocell/control circuit.
Multiple applications. Adjustable settings. Solar, LED, charger, CCTV applications
Maximum power: up to 8A. Depending on inductor and capacitor.
LED Lighting Control Accessories
PMSC36 PIR occupancy motion sensor: PMSC36 SERIES SPECIFICATIONS (PDF)
Power: 120VAC (4W), 240VAC (7W), 24VDC (14-17VAC, 1W)
Load Control: Relay (NO), works with inductive loads, 800W@120V, 1200W@240V, 10A@24V
Daylight ON mode: Adjustable, <3Lux to daylight
ON-Time: Adjustable, Min: 8 seconds. Max: 8 minutes
Sensitivity: Adjustable, min-max
Detection: up to 40ft radius (12m), 360 degrees, 3 sensors
Status Indicator: Green LED, flashing activity
Dimension: 4.65” (D) x 2.25” (H)
Standards: CE, RoHS, UR, TUV-EMC, LVD
PMSW27 PIR occupancy motion sensor: PMSW27 SERIES SPECIFICATIONS (PDF)
Power: 120VAC, 6W Max. 24VDC (20-28V), 1W Max.
Load Control: Relay (NO), works with inductive loads, 1200W @ 120VAC, 15A @ 24VDC.
Daylight ON mode: Adjustable, <15Lux to daylight
ON-Time: Adjustable, Min: 10 seconds. Max: 9 minutes
Sensitivity: Adjustable, min-max
Detection: up to 40ft radius, 270 degrees, 2 sensors
Status Indicator: Green/Orange LED, flashing activity
Dimension: 4.65” (D) x 2.25” (H)
Universal LED Driver Power Supplies: LED DRIVER POWER SUPPLY SPECIFICATIONS (PDF)
Power: 100-240VAC, 50-60Hz
Current: Constant current regulation. Constant voltage limit
Standard: Class 2 self-limiting, CSA/UL
Design: High efficiency switch-mode
Multiple applications. Multiple uses for CCTV or LED regulation

 

(c)2013 Onstate Technologies. date:04 site map